Power: 230-240 V a.c. mains <150 VA IEC 320 fused mains lead supplied
Inputs: Line (3 pin XLR) – impedance: 6k8 + or – input to ground; Sensitivity: 200mV – 2.5V RMS balanced or unbalanced.
Microphones (3 pin XLR) – impedance: 6k8 + or – input to ground; Sensitivity: 1 – 8 mV balanced
Phantom power: 12V switchable (on/off)
Outreach: (Four-way Weidmuller connector BL5. 08/4) – impedance: >10k; Sensitivity: 500mV – 6V RMS balanced
Outreach Power: 16 – 21 V d.c. is available via the amplifier’s Outreach Socket.
Output type: Current mode
Loop connector: Binding posts
Recommended loop impedance: 0.5 – 1 Ohm @ 1KHz. Will drive higher impedance loops with reduced area of coverage.
Loop drive current @ 1 Ohm: PDA200/2 – 6A.
Peak loop drive current (Measured over 5mS integration time): PDA200/2 – 8 Amps @ 1 Ohm, 13Amps @ 0.5 Ohm.
Headphones: 3.5mm jack socket allows monitoring of the loop signal via >32 Ohm headphones.
Maximum area coverage (for a 400mA/M field strength +/- 1dB):
PDA200/2 @ 6A max short term current: Square room = 200m2; Rectangular room (2:1 aspect ratio) = 240m2
Performance Frequency response: 20Hz – 14 KHz + – 3dB; Distortion: Less than 0.5 %; S to N ratio: Better than –65dB any input

Compression: A two LED display is provided for indication of signal compression. The first LED shows the beginning of compression whilst the second indicates very high compression levels have been reached.
Controls: On/Off switch incorporated into IEC mains inlet.
Four way piano key style DIP switch selects Phantom power for mic 1 & 2 XLR inputs and switches XLR input 1 between Line and Microphone settings.

Dimensions: Length – 380mm; Depth – 220mm; Height – 80mm
Weight: 3.74Kg

Ideal for use in small to medium size rooms up to a maximum of 200 square metres.